Oooh this setup just got installed on a highway in my town, I've been wondering what it was since it was installed just past one of the vehicle counting strips they use
Samsung messages was using RCS since 2012... Years before Google messages adopted it.
There are others out there that use it but call it by different names like "advanced messaging", "SMS+" etc
Google was the first to add e2e encryption and push it hard though, but if you send a RCS message from Google messages to Samsungs messages app, it won't have e2e, and most likely will be the same with messaging Apple.
But given how much Apple have fought to make it hard (or at least inconvenient) to message between them, and shut down any apps that made messaging between Apple and Android better, this is a big step for Apple
It's been a while since I used my resin printer, but I had a similar problem at one point and it came down to the support connection to the print... No matter how many supports I put, it didn't change the outcome, but when I made the support thicker and made the connection point thicker, suddenly I had no more problems... It just meant a little extra post processing on some parts
If you ever dive into the filth that is r/conservative, you'll see that this has just reenforced their views that he needs to win and they need to do anything to make that happen...I don't think there's anything that could snap that cult out of it at this point
Many years ago I had a Facebook account under my real name, and they blocked it and told me to verify ... I did everything they asked and they wouldn't accept it... I recreated it under a fake name (very obvious it's fake since it uses a celeb name) and have been using it for messaging a couple of friends for like a decade now with no issue
Well the reason I asked about the hotend was because of you're using the little glass bead version of the thermistor, and the hotend has the hole to feed through, I had an issue on an old Frankenstein ender where it wasn't touching the metal inside correctly... As it heated up, it would kind of move the thermistor away from the metal. I solved this by putting a DIY metal shroud on it that held it in the middle while touching the hotend all around. I also used thermal paste to make sure there was no gaps.