Home Improvement

This is not the first time I've ranted about the previous owner's wiring jobs, though I think they were on the other site (and I had a different username there)....

Hi all,...

This corner of the shower seems to be having some mold issues from regular use. Water seems to be collecting in that spot after a shower and doesn't seem to be draining properly. Is there anything I can do for a permanent fix?...

I bought a mostly livable fixer upper. The previous attempt to renovate the bathroom themselves and really made some mistakes I don't know how to fix. They replaced the vanity (already damaged cosmetically) and tiled one wall. There is dried grout everywhere. On the wall, the molding, the vanity (which is grouted in) on the...

There are a few spots I've neglected to replace old brittle sealant (around the kitchen sink) or never sealed at all (new faucet I installed 8 months ago). Now there's black gunk accruing under and around the sealant....

I had a heat pump installed about a year ago. It came with one free service and the installing company has been calling me almost every week to come out and do the complimentary tune up. I know that I obviously should take a free tune up, but it made me wonder. How often do I actually need this done? What are they actually...

I'm pretty new to this. I was considering replacing it with something else because it leaks slightly from the valve if it gets moved around at all, but I don't know what this connection is to start with. It goes to a dishwasher.

I am currently redesigning my kitchen in a 1930's Midwestern USA house. The kitchen has a decent floor area but the floor plan is oddly restrictive....

Hey... I bought tiles a year ago and they looked good in the store....

I have recently moved to this place, and before winter I went to install trvs on the water circulated radiators in order to have some more control over the temp (there used to be manual valves)....

Our laundry room sink has this bizarre attachment to to the back of the drain line clean out. It would almost seem like it was or is supposed to be a vent. Recently it’s started to give off a foul sewer smell when our washing machine rinses....

We have a standing shower with a strange leak. It was built with a small tiled wall/step that the frame-less glass shower wall panel sits on. I noticed water pooling outside the door after a shower. At first I thought it was the door seal but upon closer inspection it is coming out of the grout. See pics (right where the arrow...

Hello all,...

The flippers who installed the plastic shower liner only cut the faucet handle holes big enough for the stems and I need to replace the cartridges. I used a jab saw for one but that sucked, what kind of Dremel bit can I use?

I am putting a mountain feature wall in my son's new bedroom....

I'm cleaning this cabinet above the range/micro and noticed this mark on the back. I mostly keep cooking oils, vinegars, etc in here. Does this look serious?...

I am renovating my son's bedroom and trying to make the walls as nice as is reasonable before repainting. There are a few cracks like this in the paint. It looks like on top of the drywall there is paint, wallpaper, and then a few more layers of paint. The cracks could be at the seams of the drywall from expansion and...

1950s house with block foundation. I’ve patched these areas with hydraulic cement. That didn’t work so I stripped and cleaned the areas thoroughly then repatched. It improved but still getting lots of leaking where the foundation and floor meet or just above....

I've been noticing an occasional sewer smell in my bathroom, and finally realized it's only present when it's below freezing outside. As soon as the weather warms up, the smell goes away. For reference, my house was built in '55 and the toilet is plumbed into the original steel sewer line. There are no leaks (everything below...

https://files.catbox.moe/f32j05.jpg...

Here is my problem: I have an old house - nearly 100 years old - that I need to insulate but I have a few problems and concerns I need to deal with. The walls are essentially stone and an old kind on solid cement block....

Second guessing before I brute force this and break the cartridge. It should just pull straight out at this point?

We have a couple big projects that I'm not comfortable doing myself (mainly roof/foundation repair)....

I'm framing up a non-load-bearing wall that has two closet doors on it, close together (the king studs for the two openings are 13" apart). Unfortunately, they are aligned such that one of the 16" OC common studs would fall within that gap. In fact, it would only be 1/2" away from the left king stud, so not even anywhere near...