mihnt , 18 days ago (edited 10 days ago) Kept forgetting to tell you, you will want this for your ams and I use these for dryboxes. You can just grab some totes from the dollar tree or somewhere cheap and throw those in with the filament. Quick and easy way to keep your filament dry. Here's a hygrometer stand of the same type so you can keep it uniform. Fill them with this stuff here. Make sure it's the rechargeable kind so you can just keep redrying it and you'll never run out. This is all especially important if you plan on printing PETG. PETG is affected much more by moisture than PLA.
Kept forgetting to tell you, you will want this for your ams and I use these for dryboxes. You can just grab some totes from the dollar tree or somewhere cheap and throw those in with the filament. Quick and easy way to keep your filament dry.
Here's a hygrometer stand of the same type so you can keep it uniform.
Fill them with this stuff here.
Make sure it's the rechargeable kind so you can just keep redrying it and you'll never run out.
This is all especially important if you plan on printing PETG. PETG is affected much more by moisture than PLA.